slide seals
"
PTFE 슬라이드 씰 매체 저항성 오일 펌프 슬라이딩 요소
PTFE Slide Seals Oil Pumps Sliding Elements The slide seals used in oil pumps for vehicles, bus, tractor, etc, play a key role in preventing fluid leakage, maintaining pump chamber pressure, and improving volumetric efficiency. By precisely fitting between the rotating shaft and housing, they create a dynamic sealing interface through medium pressure and sliding contact. It is usually made by carbon or PTFE sliding seals provide low friction and reliable zero-leakage
PTFE 브롱스 듀얼 액션 피스톤 봉인 SPGO 시리즈 광산 수압 실린더
PTFE 청동으로 채워진 복동 피스톤 슬라이드 씰 SPGO 시리즈, 광산 및 중부하 유압 실린더에 대한 우수한 내마모성, 0-35MPa 압력 등급.
콤팩트 피스톤 슬라이드 시일 SPGO 시리즈 이동용 수압기용 복사 작용
컴팩트한 공간 절약형 복동식 피스톤 슬라이드 링 씰 SPGO 시리즈, 이동식 유압 기계, 조작기 및 소형 실린더 응용 분야를 위한 크롤링 방지 PTFE 프로파일 디자인.
낮은 마찰력 이중 작용 피스톤 밀폐 수압 피스톤 슬라이드 링 PTFE 프로필 밀폐
Hydraulic Piston Slide Rings PTFE Profile Seal SPGO The SPGO / GSF is a double-acting piston slide seal, widely used as a common sealing solution for hydraulic applications. It consists of a Teflon profile ring with low-friction properties and an energised o-ring. It also provides excellent wear resistance even at high-pressure. Technical data Pressure Speed Temperature Media 0~35MPa 1.5m/s –30° C / +110° C (according to material for the o-ring) hydraulic mineral oils, water
25mm-800mm 수압 막대 밀봉, TDI 탕덤 밀봉
Hydraulic Rod Inside Sealing TDI Tandem Seal The TDI is a inside rod sealing for hydraulic piston rod. It consists of a HPU or NBR elastic ring with a strong sealing lip, and a bronze-filled-PTFE step seal which works as a slide ring. The elastic ring provides elasticity to the rod slide ring with excellent sealing effect, also, compensating for wear. The slide ring is surrounded by the elastic ring andseals axially in direct contact with the piston rod. Underincreasing
GD1000K 피스톤 봉쇄 이중 작용 콤팩트 피스톤 봉쇄 낮은 마찰
Slide Ring For Piston GD1000K The GDKK is a double-acting piston compact seal, consisting of a slide ring, an elastic ring, two support rings, and two bearing rings. The bearing rings provide positioning and guidance, while the elastic ring provides pre-load and compensates for wear of the sealing ring. It is compatible with the sliding ring and integrated support rings to form a complete system, providing excellent sealing effects for hydraulic cylinders. Technical data GDKK
기아 GGDI 유압 복동 막대 씰/콤팩트 내부 씰링
Hunger GGDI Hydraulic Rod Seal Double Acting Sealing The GGDI is a compact rod seal in hydraulic systems, consisting of a rubber o-ring, a PTFE-bronze slide ring and two L-shaped support rings. The slide ring provides the sealing function, being pressed against the rod by the o-ring. And the two support rings provide guiding and back-up functions, to ensure the sealing environment. Technical data GGDI Profile Material O-ring ① Slide ring ② L-rings ③ Standrad NBR PTFE-Bronze
낮은 마찰 수압 회전 밀폐 안티 추출 외부 밀폐 작은 갈래
Rotary Seals Outside Sealing Small Groove The RDA is a four-part rotary combination seal for piston. It consists a Teflon slide ring, an elastic o-ring and two L-shaped back-up rings excels in applications combining relatively high working pressures with low peripheral / sliding speeds. With the convave design on the slide ring, RDA increases the static contact area, preventing the seal from rotating along. It is specifically designed to isolate and separate hydraulic oils or
수압 실린더 피스톤 밀폐 0-45MPa 외부 밀폐 복수 작용
Outer Seal The GDKK is a double-acting piston compact seal, consisting of a slide ring, an elastic ring, two support rings, and two bearing rings. The bearing rings provide positioning and guidance, while the elastic ring provides pre-load and compensates for wear of the sealing ring. It is compatible with the sliding ring and integrated support rings to form a complete system, providing excellent sealing effects for hydraulic cylinders. Technical data GDKK / GD1000K Profile
