slide seals
"
PTFEスライドシール メディア耐油ポンプ スライドエレメント
PTFE Slide Seals Oil Pumps Sliding Elements The slide seals used in oil pumps for vehicles, bus, tractor, etc, play a key role in preventing fluid leakage, maintaining pump chamber pressure, and improving volumetric efficiency. By precisely fitting between the rotating shaft and housing, they create a dynamic sealing interface through medium pressure and sliding contact. It is usually made by carbon or PTFE sliding seals provide low friction and reliable zero-leakage
PTFE ブロンズ 二重作用ピストンシール SPGOシリーズ 鉱山用水力シリンダー
PTFE 青銅充填複動ピストン スライド シール SPGO シリーズ、鉱山および強力油圧シリンダ向けの優れた耐摩耗性、圧力定格 0 ～ 35MPa。
コンパクトピストンスライドシール SPGOシリーズ 移動型水力学用
コンパクトな省スペース複動ピストン スライド リング シール SPGO シリーズ、移動式油圧機械、マニピュレータ、コンパクト シリンダ用途向けの耐クロール PTFE プロファイル設計。
低摩擦 双作用ピストンシール 液圧ピストンスライドリング PTFEプロファイルシール
Hydraulic Piston Slide Rings PTFE Profile Seal SPGO The SPGO / GSF is a double-acting piston slide seal, widely used as a common sealing solution for hydraulic applications. It consists of a Teflon profile ring with low-friction properties and an energised o-ring. It also provides excellent wear resistance even at high-pressure. Technical data Pressure Speed Temperature Media 0~35MPa 1.5m/s –30° C / +110° C (according to material for the o-ring) hydraulic mineral oils, water
25mm-800mm 水力棒シール, TDI タンドムシール 耐磨性
Hydraulic Rod Inside Sealing TDI Tandem Seal The TDI is a inside rod sealing for hydraulic piston rod. It consists of a HPU or NBR elastic ring with a strong sealing lip, and a bronze-filled-PTFE step seal which works as a slide ring. The elastic ring provides elasticity to the rod slide ring with excellent sealing effect, also, compensating for wear. The slide ring is surrounded by the elastic ring andseals axially in direct contact with the piston rod. Underincreasing
GD1000K ピストンシール 複動形小型ピストンシール 低摩擦
Slide Ring For Piston GD1000K The GDKK is a double-acting piston compact seal, consisting of a slide ring, an elastic ring, two support rings, and two bearing rings. The bearing rings provide positioning and guidance, while the elastic ring provides pre-load and compensates for wear of the sealing ring. It is compatible with the sliding ring and integrated support rings to form a complete system, providing excellent sealing effects for hydraulic cylinders. Technical data GDKK
ハンガー GGDI 水力双作用棒シール / コンパクト内部シール
Hunger GGDI Hydraulic Rod Seal Double Acting Sealing The GGDI is a compact rod seal in hydraulic systems, consisting of a rubber o-ring, a PTFE-bronze slide ring and two L-shaped support rings. The slide ring provides the sealing function, being pressed against the rod by the o-ring. And the two support rings provide guiding and back-up functions, to ensure the sealing environment. Technical data GGDI Profile Material O-ring ① Slide ring ② L-rings ③ Standrad NBR PTFE-Bronze
低摩擦液圧回転シール 排出防止 外部シール 小溝
Rotary Seals Outside Sealing Small Groove The RDA is a four-part rotary combination seal for piston. It consists a Teflon slide ring, an elastic o-ring and two L-shaped back-up rings excels in applications combining relatively high working pressures with low peripheral / sliding speeds. With the convave design on the slide ring, RDA increases the static contact area, preventing the seal from rotating along. It is specifically designed to isolate and separate hydraulic oils or
油圧シリンダのピストン シール 0-45MPa 外側シール複動
Outer Seal The GDKK is a double-acting piston compact seal, consisting of a slide ring, an elastic ring, two support rings, and two bearing rings. The bearing rings provide positioning and guidance, while the elastic ring provides pre-load and compensates for wear of the sealing ring. It is compatible with the sliding ring and integrated support rings to form a complete system, providing excellent sealing effects for hydraulic cylinders. Technical data GDKK / GD1000K Profile
