hydraulic rod seal
"
Doppellippen-Abstreifer, Polyurethan-Abstreifer mit Snap-In-Design
Double Lip Wiper Seal DHS is a double-lip polyurethane wiper seals with snap-in design. The wiper lip that faces inward helps keep the lubricating film on the rod in check. The wiper lip has a textured design that makes dry rod work better, especially in long-stroke cylinder settings. DHS double-acting feature makes the sealing more effective and helps the rod sealing system last longer. Material Polyurethane Shore A 92±5 (Harder polyurethanes are available for heavy polluted
HBY-Stäbe Bufferdichtung Hydraulische Zylinderstange Öldichtung für Radlader
HBY Hydraulic Rod Buffer Seal Cylinder Rod Oil Seals The HBY rod buffer seal is a single acting hydraulic buffer seal that works in conjunction with primary rod seals HBT, or u-seals. It absorbs shock pressure, high-frequency pressure spikes and load fluctuations, protecting the primary sealing element and extending the service life of hydraulic cylinders. In demanding hydraulic applications a single sealing element often cannot provide a leak-free operation or long service
Einwirkungsstäbe Pufferdichtungen Niedrigreibungsschrittdichtungen HBT GSJ für Hydraulikzylinder
Single Acting Buffer Step Seals Rod Stepring HBT GSJ The TDMI tandem seal is a premium internal seal element that engineered specifically for piston rods and plungers in multi-fluid applications. The advanced dual-component design ensures its versatility and durability, the TDMI seal is fully compatible with mineral oils, and can be customized for use with water-based fluids, fire-resistant fluids, and compressed air systems. Technical data Pressure Speed Temperature Media 0
Stangeninnendichtungen mit geringer Reibung, TDMI-Tandemdichtung für Hydraulikzylinder
The TDMI tandem seal is a premium internal seal element that engineered specifically for piston rods and plungers in multi-fluid applications. The advanced dual-component design ensures its versatility and durability, the TDMI seal is fully compatible with mineral oils, and can be customized for use with water-based fluids, fire-resistant fluids, and compressed air systems. Technical data Pressure Speed Temperature Media 0~45MPa 1m/s –30° C / +110° C (according to material
PTFE-Bronzstreifen Kolbenstange Verschleißring Niedrige Reibung Für Hydraulikzylinder
PTFE Bronze Strip Piston Rod Wear Ring The WR guide ring is designed for use in hydraulic and pneumatic cylinders to guide both the piston and the piston rod, with both support and guiding function. It boasts exceptional load-bearing capacity, effectively preventing metal-to-metal contact between the piston and the cylinder bore—or between the piston rod and the gland—while simultaneously absorbing lateral loads. Furthermore, the WR effectively protects critical sealing lips
Pistonstangenführerring Bronze PTFE Verschleißringe für Baumaschinen
Piston Rod Guide Ring Bronze PTFE Wear Rings The RYT guide rings or guide strips are essential in hydraulic and pneumatic cylinders to keep the piston and rod move in alignment without introducing excessive lateral forces or wear. RYT bronze-filled PTFE tape comes in rolls and may be cut to appropriate lengths to form interchangeable guide components that can be used as effective substitutes for wear rings. Technical data Pressure Speed Temperature Media - 15m/s from – 55° C
RDI Innendichtung 4 Stück Rotationsschachtdichtungen für rotierende Ausrüstung
RDI Inside Sealing 4 Piece Rotary Shaft Seals The RDI Rotary Seal is a rod compact seal with 4-piece sealing components, engineered for rotating equipment, consisting of a filled PTFE slide ring, a elastic o-ring and two L-shaped extrusion rings. It is specifically designed to isolate and separate hydraulic oils or other fluids at varying pressures, providing dependable bi-directional sealing under pressure from both sides. It excels in applications combining relatively high
Doppelwirkende Rotationsschachtdichtungen, Roto Glyd Dichtungen Radial Lippendichtungen für Automotive
Rotary Shaft Seals , Roto Glyd Seal Radial Lip Seals The GRS is a double-acting, O-ring-energized rotary seal that works for shafts, rods, and swivels that move in a circle or back and forth. Single-acting structures with higher rotational speeds are also available. The face ring is made by filled PTFE that has one or two machined grooves, depending on the cross-section. These grooves help seal the ring, keep lubricant in, and reduce surface contact to lower running friction.
Ultraharte HPU-Röhrchen PU-Strahlguss PU-Hydrolysebeständig PU-HPU98R
Ultra-Hard HPU Tube PU Bar Casting PU Hydrolysis-Resistant PU HPU98R HPU98R is a hydrolysis–resistant (H-PU), casted Polyurethane, based on MDI, Polycarbonate Polyol and certain additives. Due to the excellent overall properties it is recommended as a standard sealing material for most of the hydraulic applications. Application: Static and dynamic applications, mostly used for U-seals, wipers, step seals and packings up to 400 bar pressure in standard hydraulics. Due to its
