hydraulic rotary seals
"
Низкое трение гидравлические вращающиеся уплотнители Антиэкструзия Внешнее уплотнение Маленькая канавка
Rotary Seals Outside Sealing Small Groove The RDA is a four-part rotary combination seal for piston. It consists a Teflon slide ring, an elastic o-ring and two L-shaped back-up rings excels in applications combining relatively high working pressures with low peripheral / sliding speeds. With the convave design on the slide ring, RDA increases the static contact area, preventing the seal from rotating along. It is specifically designed to isolate and separate hydraulic oils or
Гидравлические уплотнители для скребков, уплотнители для стиральных изделий из ПТФЕ для гидравлических цилиндров
Cylinder Rod Scrapers PTFE Wiper Seal The GSZ2 is a wiper seal ideal for heavy-load and polluted working environments. Technical data Pressure Speed Temperature Media - 5m/s from –30° C to +110° C (depends on o-ring material) hydraulic oils, gas, grease, water, etc. Advantages Good sliding feature Good fulid compatibility Can be used in heavy load and serious polluted environments No creeping or sticking during startup Simple and small-sized grooves with lubrication chambers
PDD Двойная дельта пломба компактная легкая нагрузка гидравлическая поршневая пломба
Double Delta Seal Light Load Hydraulic Piston Seal PDD The PDD Double Delta is a double-acting piston seal suitable for light to medium-duty industrial hydraulics and pneumatics equipment, also applications with small diameter groove design. It provides low-friction performance in a compact design for medium pressure operating conditions. It's a clever upgrade to conventional sealing arrangements and is made to fit standard o-ring grooves. Its optimised profile reduces drag
RDI Внутреннее уплотнение 4 шт. Печати вращающихся валов для вращающегося оборудования
RDI Inside Sealing 4 Piece Rotary Shaft Seals The RDI Rotary Seal is a rod compact seal with 4-piece sealing components, engineered for rotating equipment, consisting of a filled PTFE slide ring, a elastic o-ring and two L-shaped extrusion rings. It is specifically designed to isolate and separate hydraulic oils or other fluids at varying pressures, providing dependable bi-directional sealing under pressure from both sides. It excels in applications combining relatively high
Двухдействующие вращающиеся уплотнители валов, Roto Glyd Seal Радиальные уплотнители губ для автомобилей
Rotary Shaft Seals , Roto Glyd Seal Radial Lip Seals The GRS is a double-acting, O-ring-energized rotary seal that works for shafts, rods, and swivels that move in a circle or back and forth. Single-acting structures with higher rotational speeds are also available. The face ring is made by filled PTFE that has one or two machined grooves, depending on the cross-section. These grooves help seal the ring, keep lubricant in, and reduce surface contact to lower running friction.
Серо-черные ротационные пружинные уплотнители для вращающегося вала
Rotary Spring Energized Seal Variseal TVM The VTM is a single-acting spring-energized seal, used for rotating shafts. It is widely used in various hydraulic systems. The basic design for VTM consists of a carbon filled PTFE jacket with low-friction coefficient and a v-spring or helical spring energizer made of SS301 / 316L. In addition, due to the good compatibility of the sealing materials and springs with corresponding media, they are also widely used in the chemical,
Низкофрикционные пружинные уплотнители Стек свободные пружинные загруженные уплотнители вала для гидравлической системы
Spring Seal RVA The RVA is a single-acting spring-energized seal, used for rotating shafts. It is widely used in various hydraulic systems. The basic design for VTM consists of a carbon filled PTFE jacket with low-friction coefficient and a v-spring or helical spring energizer made of SS301 / 316L. In addition, due to the good compatibility of the sealing materials and springs with corresponding media, they are also widely used in the chemical, pharmaceutical, and food
