low friction piston seals
"
낮은 마찰 수압 회전 밀폐 안티 추출 외부 밀폐 작은 갈래
Rotary Seals Outside Sealing Small Groove The RDA is a four-part rotary combination seal for piston. It consists a Teflon slide ring, an elastic o-ring and two L-shaped back-up rings excels in applications combining relatively high working pressures with low peripheral / sliding speeds. With the convave design on the slide ring, RDA increases the static contact area, preventing the seal from rotating along. It is specifically designed to isolate and separate hydraulic oils or
PTFE 브롱스 듀얼 액션 피스톤 봉인 SPGO 시리즈 광산 수압 실린더
PTFE 청동으로 채워진 복동 피스톤 슬라이드 씰 SPGO 시리즈, 광산 및 중부하 유압 실린더에 대한 우수한 내마모성, 0-35MPa 압력 등급.
높은 온도 피스톤 밀 SPGO 시리즈 철강 공장 수압에 대한 이중 작용
PTFE 프로파일 링과 FKM O-링이 있는 고온 복동 피스톤 씰 SPGO 시리즈는 제철소 및 산업용 프레스 유압 실린더용으로 110°C 정격입니다.
PTFE 브롱스 스트립 피스톤 막대 착용 반지 수압 실린더를위한 낮은 마찰
PTFE Bronze Strip Piston Rod Wear Ring The WR guide ring is designed for use in hydraulic and pneumatic cylinders to guide both the piston and the piston rod, with both support and guiding function. It boasts exceptional load-bearing capacity, effectively preventing metal-to-metal contact between the piston and the cylinder bore—or between the piston rod and the gland—while simultaneously absorbing lateral loads. Furthermore, the WR effectively protects critical sealing lips
피스톤 막대기 U컵 오일 밀봉 대칭 입술 밀봉 UN
The UN Piston Rod Seal (U-Cup Seal) is a single-acting, general purpose U-ring seal made of Polyurethane. It is suitable for light to medium-duty hydraulic reciprocating applications and provides an outstanding dry sealing solution. It is easy to install and provides superior low-temperature flexibility and mechanical wear resistance in tough operating conditions. We also supply low temperature u-seals -45℃~+100℃. Technical data Pressure Speed Temperature Media 0~35MPa 0.5m/s
콤팩트 피스톤 슬라이드 시일 SPGO 시리즈 이동용 수압기용 복사 작용
컴팩트한 공간 절약형 복동식 피스톤 슬라이드 링 씰 SPGO 시리즈, 이동식 유압 기계, 조작기 및 소형 실린더 응용 분야를 위한 크롤링 방지 PTFE 프로파일 디자인.
스탠 내부 밀폐 낮은 마찰 TDMI 탕덤 밀폐 배열 수압 실린더
The TDMI tandem seal is a premium internal seal element that engineered specifically for piston rods and plungers in multi-fluid applications. The advanced dual-component design ensures its versatility and durability, the TDMI seal is fully compatible with mineral oils, and can be customized for use with water-based fluids, fire-resistant fluids, and compressed air systems. Technical data Pressure Speed Temperature Media 0~45MPa 1m/s –30° C / +110° C (according to material
25mm-800mm 수압 막대 밀봉, TDI 탕덤 밀봉
Hydraulic Rod Inside Sealing TDI Tandem Seal The TDI is a inside rod sealing for hydraulic piston rod. It consists of a HPU or NBR elastic ring with a strong sealing lip, and a bronze-filled-PTFE step seal which works as a slide ring. The elastic ring provides elasticity to the rod slide ring with excellent sealing effect, also, compensating for wear. The slide ring is surrounded by the elastic ring andseals axially in direct contact with the piston rod. Underincreasing
단행성 PTFE 스프링에너지 밀폐
Piston Spring Energized Seals Variseal M2 The RVA is a single-acting spring energized seal used in reciprocating pistons. It consists an asymmetric U-shaped PTFE slide jacket and a precision-engineered V-shaped cantilever spring and is the industry-recommended choice for applications demanding stick-slip-free (no-creep) performance, superior chemical resistance, and universal media compatibility. It is widely utilized in high-precision equipment Technical data Pressure Speed
