o ring back up ring
"
PW dubbelwerkende polyurethaan zuigerafdichtingen Lage wrijving Lage gasdoorlaatbaarheid
PW Double Acting Polyurethane Piston Seals The AQ5 Piston Seal is a double-acting seal, engineered for challenging applications where complete separation of 2 different media (liquid/liquid or liquid/gas for example) is essential. The design of the AQ5 is based on a low-friction dynamic slide ring energised by a high-elasticity O-ring in combination with a special Quad Ring (X-Ring) elastomer at the dynamic sealing surface. This multi-component design profile is ideal for
PDD dubbel deltazegel Compact lichtbelasting Hydraulisch zuigerzegel
Double Delta Seal Light Load Hydraulic Piston Seal PDD The PDD Double Delta is a double-acting piston seal suitable for light to medium-duty industrial hydraulics and pneumatics equipment, also applications with small diameter groove design. It provides low-friction performance in a compact design for medium pressure operating conditions. It's a clever upgrade to conventional sealing arrangements and is made to fit standard o-ring grooves. Its optimised profile reduces drag
RDI Binnenverzegeling 4 stukken roterende asverzegelingen voor roterende apparatuur
RDI Inside Sealing 4 Piece Rotary Shaft Seals The RDI Rotary Seal is a rod compact seal with 4-piece sealing components, engineered for rotating equipment, consisting of a filled PTFE slide ring, a elastic o-ring and two L-shaped extrusion rings. It is specifically designed to isolate and separate hydraulic oils or other fluids at varying pressures, providing dependable bi-directional sealing under pressure from both sides. It excels in applications combining relatively high
PTFE-brons dubbelwerkende zuigerafdichting SPGO-serie voor mijnbouw van hydraulische cilinders
PTFE Brons gevulde dubbelwerkende zuigerschuifafdichting SPGO-serie, superieure slijtvastheid voor mijnbouw en zware hydraulische cilinders, drukbereik 0-35 MPa.
Polyurethaan symmetrische zuigerstang afdichtingen U Cup-stang afdichtingen voor landbouwmachines
The BA seal is a symmetric single-acting rod seal with a nitrile rubber quad ring as preloader. low inner lip and high outer lip. Can be used to seal the piston rod in heavy-duty mobile machinery or industrial hydraulics with high dynamic and static tightness. Analogues: IDI RU0 S1S B3 Rod U-Cup Seal Technical data Pressure Speed Temperature Media 0~40 MPa 0.5m/s from – 35° C to + 105° C, with peaks up to 110° C hydraulic fluids, grease, water Advantages High Wear & Extrusion
Dubbelwerkende roterende asafdichtingen, Roto Glyd-afdichtingen met radiale lip voor auto-industrie
Rotary Shaft Seals , Roto Glyd Seal Radial Lip Seals The GRS is a double-acting, O-ring-energized rotary seal that works for shafts, rods, and swivels that move in a circle or back and forth. Single-acting structures with higher rotational speeds are also available. The face ring is made by filled PTFE that has one or two machined grooves, depending on the cross-section. These grooves help seal the ring, keep lubricant in, and reduce surface contact to lower running friction.
Lage wrijving hydraulische roterende afdichtingen Anti-extrusie buiten afdichting kleine groef
Rotary Seals Outside Sealing Small Groove The RDA is a four-part rotary combination seal for piston. It consists a Teflon slide ring, an elastic o-ring and two L-shaped back-up rings excels in applications combining relatively high working pressures with low peripheral / sliding speeds. With the convave design on the slide ring, RDA increases the static contact area, preventing the seal from rotating along. It is specifically designed to isolate and separate hydraulic oils or
Asymmetrische hydraulische stangafdichtingen Enkelwerkend polyurethaan PU-oliekeerring RU3 D-3
Asymmetric Hydraulic Rod Seal PU Oil Seals RU3 D-3 The JB-3 is a single-acting hydraulic rod seal with asymmetric profile. The JB3 U-ring features precision-angle-trimmed sealing lips, providing optimum sealing efficiency for light, medium and heavy duty applications. It can be easily configured with a compatible full-depth back-up ring to withstand extreme pressure spikes in harsh environments. The inner dynamic lip is asymmetrically designed with an advanced profile,
Dubbelwerkende hydraulische schraperafdichtingen, lipped ruitenwisserafdichtingen PT1
Hydraulic Scraper Seal-Lipped Wiper Excluder PT1 The PT1 is a double-acting o-ring-energised scraper and dust seal that prevents the ingress of mud, dust and other contaminants, greatly increasing the service life of hydraulic systems. The PT1 is made up of a PTFE profile ring with a sealing edge and a wiping edge, energised by two o-rings to give excellent secondary sealing ability. For light and medium-duty industrial hydraulics, it is perfectly suited to back-pumping
